DIY ATtiny45/85 ISP Header
A quick weekend tip for a change, I thought to share a nice small soldering project will make programming ATtiny45 and ATtiny85-based projects a flash:
Basically I took a piece of veroboard, soldered some extra long pin headers on the bottom so it will form a tent of sorts above a ATtiny45/85 attached to a breadboard project. Then I soldered a 6-pin header to attach the ISP programming cable to, and used short pieces of jumper wire to route the header pins to correct ATtiny85 pins.
Now whenever I need to flash a ATtiny45/85 project sitting on a breadboard, I can just put this on top of that and never need to look up the pin layout again!
You can click the images for larger versions. I’ve also been quite busy with my PS/2 projects, so I have some nice material to share regarding that when I have some free time again in my hands!